Expanded PTFE Tape

Expanded PTFE Tape is widely used for many industrial application.

IKSONIC main production: PTFE turning plate, PTFE molded plate, PTFE gasket manufacturer, teflon tetrafluoroethylene rods, metal spiral wound gasket strip dedicated tetrafluoroethylene, PTFE raw material belt: min oil-free raw material belt and oil with raw material (raw material with Large universal width: 50 width 40 30 width width width width 20 18 25 width, thickness: 0.2mm thick) tetrafluoroethylene elastic band, PTFE elastic rod, PTFE soft oil stick, various materials packing (Kevlar packing, graphite packing, white PTFE packing, PTFE packing, mixed packing, carbon packing, high water based packing, butter packing, cotton packing, asbestos packing nylon packing, packing Gore) and the like.

Expanded PTFE tape advantages:

Excellent sealing performance. Tetrafluoroethylene elastic band with a high degree of compressibility, it is easy to fill and empty the sealing surface trenches, plugging the leak interface, and when subjected to tension has rebound and expand, so the higher the internal pressure of the medium, the sealing force the larger, which is sealed with the most magical properties.
· Easy to use and quick. Cut a section of desired length with PTFE, as long as both ends of the first cross-phase Diego, can constitute an arbitrary size, any shape of the ring. Sealing tape adhesive tape attached on one side to make the sealing with fixed sealing surface equipment, to facilitate the installation, and then only small bolt tightening force (minimum preload of 50Kgf / cm2) will be able to form a good seal.

PTFE sealing tape application:

Cleanup dry sealing surface, select a width PTFE tape, adhesive tape to protect torn paper, stick the tetrafluoroethylene elastic band against the sealing surface of the outer edge of both ends of the first cross-phase Diego at a bolt at the intersection away from their more than 2cm above (NOTE: on a flat surface using the flange ends first phase must cross Diego used on recessing flange, may be parallel stacked, stacked more than 2cm), corresponding to the closed sealing surface, uniform tighten each bolt, head to the crossing will be pressed with other parts of the same thickness, the intersection will not leak.