Product Introduction for Plug stopper for test tube
Our factory production of silicone series Plug stopper for test tube of laboratory products are made of food grade silicone composition.
Scope
Plug stopper for test tube is Mainly applied to laboratory test tubes, to prevent secondary pollution spill or
Instructions
The silicone rubber Plug stopper for test tube inserted into the corresponding bottle
Cured flexible, good sealing insulation resistance, high temperature short time up to 350 degrees.
Also with acid, in acid copper plating bath does not swell.
Mainly used for dry hole and cover hole broken processes, spraying metal plastic, clogging electrophoretic coating and electroplating, protection of threaded holes or threaded column, paint and chemical solution to prevent economic infiltration.
Corrosion-resistant, acid-resistant. . In contrast to conventional screwing with cost-saving labor costs, etc.
Precautions
1, the product repeatedly.
2, the product should be avoided interludes use, should be kept clean, the rubber stopper ingredients are organic components, those components similar to a C-containing organic matter, so do not bottle with an organic solvent, a rubber stopper, otherwise it will dissolve, similar compatibility
3, the product should be stored in dry and ventilated warehouse, the temperature at 0-35 ℃, relative humidity less than 80%, and set the ground more than 0.2cm.
4, according to the above storage conditions, this product is valid for five years.