AMT Power Cushion Buffer Urethane Cushion Manufacturer

AMT Power Cushion Buffer Urethane TTC rubber spring can be installed with the coil spring shock absorbers of motor vehicles. As the OEM manufacturer, We would like to present you best quality Urethane Cushion Buffer .

AMT Power Cushion Buffer Urethane

Transparent crystal polymer material buffers, Power Strong Cushion Buffer.
Each model is not the same weight, calculated in accordance with the vehicle aligned model
Be applicable to all private cars, commercial vehicles, sport utility vehicles, vans, etc.

[Performance]:
1, using the principle of a buffer, damping performance improved significantly. Damping effect can make the car ride comfort on a grade, especially reflected in the pit had been Hom.
2, non-bumpy asphalt road through a sharp turn significantly improve the stability.
3, the process of restraint cars with uneven pavement to the vehicle body vibration, thereby reducing the vibration noise cars.
4, an appropriate increase in vehicle height, improve vehicle performance through road barriers.
5, shock absorbers and suspension systems to protect and prolong the life of automobile shock absorber, damping spring seal to prevent damage due to excessive turbulence intensity caused.

Special materials used by the US Space & Korean high-end environmentally friendly automotive technology production.
> Mercedes-Benz slow moving principle, an effective solution to the problem of soft shock absorber spring.
> 80% effective absorption of noise from the suspension system.
> Depending on the model can alleviate pressure from 0.8 to 1.5 tons of instant vehicle body.
> Guarantee damper suspension system> avoid damping seal leakage damage.
> Extend the life of automobile suspension system.
> Body can rise 3-5cm (vary by car).
> High-speed driving stability, security has improved significantly.
> Easy installation, no need to change any part of the vehicle.
For a long time the old cars, an effective solution to the problem of weak shock absorber spring, shock absorber performance resume.

【Features for spring car buffer cushion】:

1. The porous design, more uniform force, easier to play the role of a buffer.
2. material well, the overall transparent design, to ensure life.
3. Make advanced, one-piece, seamless, high pressure resistance
4. Japan’s imports of polymer materials manufacturing, production of top buffer, so that the damper spring buffer has the most powerful force.
[Use] the feeling:
First, with comfortable than before. Past the potholes shock will be significantly reduced, especially when you feel more comfortable and fast through the obvious; also reduced vibration and noise becomes low, the body has issued the original rumble into the tire under chassis slapping on the ground bang bang sound there is a customer commented muted effect: “now hear the bass part of the car audio.”
IKSONIC you recommend this section when turning the vehicle body tilt and flick phenomenon has not become aware of the tire does not bounce like that before, shorten the braking distance becomes inevitable.
In addition, the elevated chassis make you more smoothly when passing through potholes.

【installation method for spring car buffer cushion】:

1, with the jack hanging from the top of the wheel
2, the damper spring with water to wipe clean (wipe several times), ensure that the spring clean, no sand, gravel will reduce the life of the shock absorber.
3, the damper spring coat soaked soap, in the groove in a strong buffer painted soaked soap; wash hands, put the strong buffer spring on the line (installed on the tank, and then install the next slot, or you can install the upper and lower half of the tank, and then install the remaining rotation until the spring all located slot, the excess portion may be cut off with a knife).
4, finally, after the installation to the inside of the middle notch turn, determine springs in the slot, you can put down the car.