Original imported CFW Simrit BABSL oil seal made in Germany
We are a professional manufacturer of all kinds of rubber parts, if have any questions, please feel free to contact us .
click & send an product inquiry to IKSONIC team.
Email: [email protected]
WhatsApp/Mobile/WeChat: +86-13370616532 , +86-15315489052
WeChat: taishanfu
Skype ID: wingxsonic
- Description
- Contact Us
Description
Original imported CFW Simrit BABSL oil seal made in Germany
Original imported CFW Simrit BABSL oil seal BABSL type
Original imported CFW Simrit BABSL oil seal
Model: BABSL
Type: DIN3760 A type
Material: Simrit72 NBR902 Simrit75 FPM595
1.Original imported CFW Simrit BABSL oil seal made in Germany Features
■ ■ Outer edge of oil seal: rubber coated
■ ■ Seal lip is short and soft, with spring
■ There are dust-proof lips
2. Material
Nitrile rubber
Code: 72 NBR 902
color: blue
Hardness: Shao A 72 degrees
fluororubber
Code: 72 NBR 595
Color: reddish brown
Hardness: Shore A 75 degrees
Metal skeletons: Non – alloy steels DIN EN 10027-1
Spring: Spring steel
3. Operating conditions
Medium: mineral oil, synthetic oil
-25 ° C to + 160 ° C (75 ° FKM 595); –
V: See the sample diagram
P: See sample diagram
4. Original imported CFW Simrit BABSL oil seal made in Germany Advantages
■■ Used to seal pressurized working media
■ ■ Seal the outer edge of the oil seal is reliable, even if the roughness of the hole in the hole or large
Thermal expansion and the use of open cavity
■■ Seal low viscosity and gaseous media when there are advantages
■ ■ Fluorocarbon formulations 75 FKM can be used for high temperature and chemical media
■ ■ Dust-proof lips to prevent general and moderate dust pollution and dirt from the outside
Boundary intrusion
■ ■ Smaller axial dimensions of Original imported CFW Simrit BABSL oil seal
(Note: will cause temperature rise, due to friction heat)
5. Cavity and machining standards
Shaft: Tolerance: ISO h 11
Concentricity: IT 8
The roughness R a = 0,2 – 0,8 μm
R z = 1, 0 – 5, 0 μm
Rmax = & lt; 6,3 [mu] m
Hardness: 45-60 HRC
Polishing: remove the guide spiral; the best use of grinding and polishing
Housing: Tolerance: ISO H8
Roughness: Rz = 10-25 m
6. Original imported CFW Simrit BABSL oil seal Install
According to DIN3760, careful installation is a prerequisite to ensure good sealing ring function
Dimensions of the shaft diameter ¢ d1
BABSL (NBR): 8 … 340 mm
BABSL (FKM): 8 … 170 mm
* With synthetic oil (polyalkylene glycol / poly-α-olefin light), the maximum operating temperature can not exceed 80 ℃.
7. Recommended Applications
■ ■ Hydraulic drive (hydraulic pump, all kinds of engines)
■ ■ 2-stroke engine
Original imported CFW Simrit BABSL oil seal Features
■ Outer edge of oil seal: rubber coated
■ Sealing lip is short and soft, with spring
■ There are dust-proof lips
product advantages
■ Original imported CFW Simrit BABSL oil seal is used to seal the pressure working medium
■ Seal the outer edge of the oil seal is reliable, even if the roughness of the hole in the hole or large
Thermal expansion and the use of open cavity
■ Advantages of sealing low viscosity and gaseous media
■ Fluorocarbon formulation 75 FKM can be used for high temperature and chemical media
■ Dustproof lips to prevent general and moderate dust pollution and dirt from the outside intrusion
■ Small axial dimensions
(Note: will cause temperature rise, due to friction heat)
Recommended Applications
■ Hydraulic drive (hydraulic pump, all kinds of engines)
■ 2-stroke engine
If you have any questions or products request, please leave message or call us.
Email: [email protected]
WhatsApp/Mobile/WeChat: +86-13370616532 , +86-15315489052
WeChat: taishanfu
Skype ID: wingxsonic