Pneumatic marine airbag Roller Inflatable Ship launching air bag

Rubber high pressure Pneumatic marine airbag Roller Inflatable Ship launching air bag Bladder Manufacturer to set a boat in motion by pushing it or allowing it to roll into the water with inflatable rubber air bladder.

Pneumatic marine airbag Roller Inflatable Ship launching air bag

click & send an product inquiry to IKSONIC team.

Email: [email protected]

WhatsApp/Mobile/WeChat: +86-13370616532  , +86-15315489052

WeChat: taishanfu

Skype ID: wingxsonic

Airbag technology originated in China, has now been widely applied to ship water, heavy lifting and marine transportation to help move the floating field, reducing costs (over 30%), operational safety, a variety of harsh working environment adaptability and protect the ecological environment and so on, have a significant advantage.

IKSONIC can customize the diameter of Pneumatic marine airbag Roller Inflatable Ship launching air bag with high quality, enough stock for standard diameter.

IKSONIC company marine rubber air bag products at several characteristics:
(1) In order for the airbag to work in harsh environments, IKSONIC company special marine rubber balloon made of high quality natural rubber products are mainly raw materials, while adding Qilu Petrochemical styrene-butadiene rubber and other materials, a reasonable formula, the balloon has outlasted aging resistance and abrasion resistance. Airbag gel content of up to 60%, rubber tensile strength exceeding 18Mpa.
(2) Airbag frame material used is a single cord of three strands of Excellence dipped nylon tire cord fabric, single breaking strength of 320N, and thus a large extent, improved product performance and service life.

(3) the Airbag end use of blast-resistant design of the new structure, which effectively enhances the bag body and the end pieces of iron binding strength and tightness, which effectively put an end to the balloon deflated phenomenon occurs, remove the product safety hazards.
(4) The Boat ship launching water airbag bladder using the latest winding technology as a whole. The technology R & D department of IKSONIC Co., using three-dimensional animation simulation technology, when the air bag in the bottom roll, a series of negative factors forced the ship to the direction and size of the balloon, the balloon extrusion scrolling and other harsh conditions generated conduct cords adjust the layout to design a rational and effective wound, greatly improving the airbag launching of safety and reliability.

This rubber Pneumatic marine airbag Roller Inflatable Ship launching air bag is mainly used to help float the wreck salvage, underwater pipelines and the installation of large objects.
This rubber air bladder are easy to install, buoyancy, low cost, long life and other advantages.
IKSONIC rubber air bladder highly focused on the rubber balloon and fenders (by the ball) research and development, production, sales and service. Wherein the balloon-pull, high-pressure balloon, floating balloon help salvage airbag, the airbag has been widely used for marine caissons lifting shift operation, the water buoyancy aid construction of the ship and launching, tunnel shield seal, pipe plugging, and other precast slab field.
This rubber air bladder wound advanced production technology, to ensure that the product has a good air-tightness, particularly to help float the balloon of air tightness. “Nanhai One” to help float the balloon at the operating pressure, pressure 24 hours, the pressure drop of less than 3%.

This rubber air bladder product advantages:
1, the raw materials are natural rubber, including rubber rates above 60%, and long service life.
2, the outer layer of plastic is very thick, so easy to wear, air tightness, which can effectively protect the liner. In addition, natural rubber with plastic rate, anti-aging, anti-seawater immersion. In addition, this line is the brand manufacturers.
3, curing way: Some manufacturers are tied together with a rope vulcanization.
We use cloth, so as to ensure appearance of the product.
4. Service: We can provide customers with repair methods, repair kits.

IKSONIC is specializing in rubber airbag,Pneumatic marine airbag Roller Inflatable Ship launching air bag, air balloon, fenders and other products, and provide technical services and solutions. In 2007, the company uses ultra-high pressure balloon project, the success of the Song Dynasty ancient shipwreck  shift transported to the Crystal Palace, the completion of this remarkable archaeological salvage mission. In 2008, through technological innovation, successfully developed to help float the balloon, underwater salvage, marine construction provides a convenient tool. 2013 once again will help upgrade the floating balloon balloon marine engineering, successfully completed the installation of the jacket buoyancy aid pilot project to become a strategic partner of CNOOC. The company has passed the Bureau Veritas Quality Management System certification, product by CCS, ABS, GL, BV and other classification societies approved the test, customers all over the world on six continents in more than 50 countries and regions, in the port, marine engineering, shipbuilding, tunnel It has been widely applied.

Marine airbags are mainly used on ships and launching the balloon down the water craft overcome many of the limitations of traditional slide, to the shipbuilding and ship repair industry has brought a revolutionary innovation and development.

Marine airbags selection:
Diameter D: Marine airbags generally used airbag diameter 1.5 m, when buttress higher, the choice of a larger diameter airbag (1.8 m in diameter or 2 meters)
, Smaller vessels can choose one meter or 1.2 meters in diameter airbag.
The effective length Le: effective length is the length of the airbag portion of the balloon cylindrical body, excluding the head of the vertebral body length.
(1) Boat width <= 20 m, the choice of Le = Breadth B on the principle of the effective length of the airbag, such as an air bag is not long enough to be used interchangeably.
(2) Breadth> 20 m, airbags general use with double butt or cross-use.
Airbag model determination: 1000 tons dead weight ship can choose S1 series airbags, more than 1,000 tons of the ship should be used S2 series, working pressure to
By seeking particularly high in the case, the choice of S3 series airbags.
Airbag Quantity: boat placed below the number N1 plus the number of spare airbag N2, mainly based on the number of airbag ship weight and different airbag carrying capacity model to determine, N1 = boat weight G / (Unit balloon carrying capacity x effective length Le), spare airbag determine the actual situation.