NL inner coupling tooth set PA6, PA66, nylon reinforced nylon inner sleeve gear

NL inner coupling tooth set PA6, PA66, nylon reinforced nylon inner sleeve gear

NL inner coupling tooth set PA6, PA66, nylon reinforced nylon inner sleeve gear is made of fiberglass reinforced nylon 6 toughened double, it is the largest amount of general engineering plastics. It has good mechanical and electrical properties can be toughened, reinforced, flame retardant, modified to improve the wear resistance and heat resistance.

NL tooth type flexible couplings inside, elastic tooth coupling is currently the latest products in foreign countries has been widely adopted for inter-axle transmission and immunity to allow large axial and radial displacement angular displacement, and has a simple structure, easy maintenance, easy off loading, low noise, low loss power transmission, long life and other advantages, much consumers.

Nylon gear coupling sleeve Application and features:
The product is suitable for the flexible drive shaft between the trap allows axial and radial displacement, has a simple structure, easy disassembly,
Easy maintenance, long life, low noise, low cost, small effect each transmission losses and so on.

Product Features:

Nylon has good overall performance, including mechanical properties, heat resistance, wear resistance, chemical resistance and self-lubricating, low friction coefficient, a certain degree of flame resistance, ease of processing, suitable for glass fiber and other fillers enhance the modification, improve performance and expand the scope of application, followed by its overload protection function, when the torque is too large, the gear itself is damaged, the power transmission interrupted to protect the life or safety means subordinate, reduce losses.
Since nylon reinforced nylon inner sleeve gear with non-toxic, light weight, excellent mechanical strength, abrasion resistance and good corrosion resistance, it is widely used in place of copper and other metal bearings, gears, pumps in mechanical, chemical, instrumentation, automotive and other industries leaves and other parts. Polyamide melt-spun into filaments have high strength, mainly to synthetic fibers can be used as medical sutures
It is a real sense of self-lubricating nylon, in the casting process of forming a liquid lubrication system, making oil nylon bearing life significantly increased, reaching 25 times 6 times the normal bearing life of nylon 6 and phosphor bronze bearing life! Nylon containing a lubricant oil does not drain, adsorption and exhausted, do not need to add it again. Lubricant oil nylon nylon greatly broadens the range of use, especially for some of the components can not be lubricated.
Technical performance parameters:
Density: 1.15g / cm3
Impact strength: 8.5kJ / m2
Tensile strength: 80MPa
Shore D hardness: 80-85
Compressive strength: 110MPa
Coefficient of friction: 0.1 to 0.3 on the steel surface
Continuous operating temperature: -80-125 degrees

Product Show

click & send an product inquiry to IKSONIC team.

Email: [email protected]

WhatsApp/Mobile/WeChat: +86-13370616532  , +86-15315489052

WeChat: taishanfu

Skype ID: wingxsonic